DATREND Systems AMPS-1, Operating Manual

Page: 33 / 100

AMPS-1 OPERATING MANUAL
ECG ST =<
ST DEPR: 0mV
Figure 17 - ECG ADVANCED: ST SEGMENT
ECG AXIS =<
AXIS: VERTICAL
Figure 18 - ECG ADVANCED: AXIS
3.5 ECG Advanced Function
There are several additional parameters associated with the ECG simulation which may
be used less frequently. These parameters (ECG ST, ECG AXIS and ECG
NEONATAL) are available via the ADV(7) button.
Pressing the ADV(7) button while viewing the ECG menu will change the screen to
that of
Figure 17 , the ST Segment Menu. To return to the Normal ECG menu, press
the ECG(1) button and the screen will return to that of Figure 13 .
While viewing the ECG ST menu, press the UP (
•
) or DOWN(
–
) arrow button to
scroll through the settings provided for ST elevation or depression: 0, +0.1, +0.2, +0.3,
+0.4, +0.5, +0.6, +0.7, +0.8, -0.8, -0.7, -0.6, -0.5, -0.4, -0.3, -0.2 and -0.1mV.
If an ST elevation or depression is selected on the menu of Figure 17 ,
pressing ENTER overrides the current ECG RATE setting and
automatically changes the rate to 80 BPM. This rate override occurs even
if ECG ST is set to 0 mV. To restore the original rate, press the ECG
button to view the rate, then press ENTER. This will cancel the
simulation of ST elevation or depression and return the ECG to NSR.
Pressing the RIGHT (
u
) arrow button will change the screen to that of Figure 18 , the
ECG Axis Menu.
Press the UP (
•
) or DOWN(
–
) arrow button to scroll through the settings provided
for ECG axis: NORMAL (INTERMEDIATE), HORIZONTAL, and VERTICAL.
ECG Normal Sinus Rhythm/Chapter 3
#
Page 19