manualshive.com logo in svg

DataCard SD260, Installation And User Manual

Share
Download
DataCard SD260 Installation And User Manual Download Page 88

 

78

Using the Printer

106: Magstripe data not found

The printer could not find magstripe written 
data on card.

To print the card again:

1. 

Insert a magnetic stripe card that matches 
the printer settings.

2. 

Position the card with the magnetic stripe 
down and to the right side of the printer.

3. 

Press the U

SER

 button on the printer or 

click “Retry” in the Message box.

HINTS & TIPS

• 

The card might not match printer settings or the data sent.

• 

Ask the Manager to verify that the card, the data, and the printer settings 
match.

107: Magstripe read data error

The printer could not read the magstripe 
data on the card. To read the card:

1. 

Insert a magnetic stripe card with data.

2. 

Insert the card with the magnetic stripe 
down and to the right side of the 
printer.

HINTS & TIPS

• 

The data might use a different format 
than the current printer setting.

• 

Ask the Manager to verify that the card, 
the data, and the printer settings match.

Summary of Contents for SD260

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands