DataCard SD260, Installation And User Manual

Page: 85 / 216

75
•
“115: Wait for print temperature”
•
“116: Magstripe not available”
•
“117: Reader not available”
•
“118: Print ribbon type problem”
•
“119: Print ribbon not supported”
•
“120: User paused the printer”
•
“121: Print ribbon ID problem”
•
“122: Magnetic stripe format problem”
•
“123: Insert new card then continue”
•
“124: Insert same card then continue”
•
“500: The printer is not available. The card cannot print.”
•
“501: The printer connection was lost. Printing the card is canceled.”
•
“502: The card data is missing or is not usable. The card cannot print.”
•
“503: The magnetic stripe data is missing. The card cannot print.”
•
“505: Bonjour is not installed. Cannot connect to the printer.”
•
“506: A card is currently processing.”
100: Request not supported
To print the card:
1.
Change the data to match printer features and settings.
2.
Send the new card to print again.
HINTS & TIPS
•
The card, if it started to print, should be discarded.
•
Make sure you have chosen the correct printer in the application. Ask your
Manager for assistance if needed.
101: Job could not complete
The card took too much time. Press the U
SER
button on the
printer to clear the error.
To print the card again:
1.
Make sure all data for the card is available.