DataCard SD260, Installation And User Manual

Page: 201 / 216

191
14.
Enter the assigned address:
•
The IP Address has 4 bytes, separated by
periods.
•
A curser appears under the digit that
will change.
a.
Use the arrow keys to change one
digit at a time.
b.
Use the E
NTER
key to navigate
through the address bytes. The
address byte shows three digits
when it can be changed and the
cursor is under the right-most digit.
c.
When all four bytes are correct, press
the E
NTER
key.
15.
Repeat Steps 12 through 14 to enter Subnet
Mask and Gateway Address information.
16.
Press E
NTER
when finished entering all
address information.
17.
Press E
NTER
to Apply/Restart.
18.
Press the U
SER
button repeatedly to exit the
menu system. “Ready” is displayed and the
U
SER
light glows steady green.