manualshive.com logo in svg

DataCard SD260, Installation And User Manual

Share
Download
DataCard SD260 Installation And User Manual Download Page 30

 

20

Install the Printer

Install the Printer Driver

This section provides information about installing the printer driver on a PC 
running a supported Windows operating system. See 

“PC Requirements”

 for a 

list of supported operating systems.

Most often, the driver is installed using the installation CD shipped with the 
printer. The driver installation procedure prompts you to power on the printer 
and when to connect cables.

Use one of the following links to view instructions about how to install the 
printer driver:

• 

“USB Installation using the Installation CD”

 

• 

“USB Installation using a downloaded driver”

 

• 

“Network Installation using the Installation CD”

 

• 

“Network Installation using a downloaded driver”

 

USB Installation using the Installation CD

1. 

Log on to the PC as a user with Administrator access. 

2. 

Insert the driver CD in the PC’s drive. The driver install window opens. 

3. 

Click the 

Install a USB Printer

 button.

                                                            

                                                  

Summary of Contents for SD260

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands