DataCard SD260, Installation And User Manual

Page: 175 / 216

165
H
INTS
& T
IPS
•
In a PC application, use only one page if sending Encode Only data. A two-
page document will cause an error and the card will not be encoded.
•
See How “Use Magnetic Stripe Fonts” for information on formatting data
using fonts.
•
See “Use Magnetic Stripe Escapes” for information on using escapes to
format data.
•
You are responsible for using characters supported by the track format. The
driver discards line returns before and after data.
Change the LCD Backlight
Begin with the printer “Ready”. The U
SER
button shows
steady green.
1.
Press the U
SER
button to display “Suspended” on Line 1 of
the LCD panel.
2.
Press the E
NTER
key to enter the menu system.
3.
Press the down arrow key to scroll to the Configuration
menu.
4.
Press the E
NTER
key to enter the Configuration menu.
LCD Backlight is the first choice on the menu.
5.
Press E
NTER
to change the LCD Backlight.
6.
Press the down arrow key to lower the light level, or press
the up arrow key to increase the level.
7.
When the light is the level you want, press the E
NTER
key.
The printer saves the setting and returns to the
Configuration menu.
8.
Press an arrow key repeatedly to display “Exit” on line 2.
9.
With “Exit” displayed on Line 2, press the E
NTER
key
repeatedly to exit the menu system.
10.
With “Suspended” displayed on Line 1, press the U
SER
key.
11.
The printer is ready.