manualshive.com logo in svg

DataCard CD800, User Manual

Looking for a comprehensive manual to get started with your DataCard CD800? Look no further! Download the Quick Install Manual for free from manualshive.com, where you can find an extensive collection of user manuals. Get acquainted with your CD800 hassle-free and unlock its complete potential.

Share
Download
background image

ix

 

Contents

Chapter 1: Introduction ____________________________________________________________ 1

About this Manual______________________________________________________________ 1
Intended Audience ____________________________________________________________ 1
Technical Support ______________________________________________________________ 1

Chapter 2: About the Printer ________________________________________________________ 3

About the CD800 Card Printer ___________________________________________________ 3
Printer Components ____________________________________________________________ 3

Printer Left Side _____________________________________________________________ 4
Printer Right Side ___________________________________________________________ 5
Printer with Single Input Hopper _____________________________________________ 6
Printer with Optional Multi-Hopper ___________________________________________ 7
Print Ribbon Cartridge ______________________________________________________ 8
Printer with Optional CLM Laminator_________________________________________ 9
System Label ______________________________________________________________ 10

Chapter 3: Using the System _______________________________________________________ 13

How the Card Travels__________________________________________________________ 13
Card Printer System Overview__________________________________________________ 14

Equipment ________________________________________________________________ 14
Tasks and Users ____________________________________________________________ 14

Printer Controls________________________________________________________________ 15

Power Button______________________________________________________________ 15
LCD Panel Menus__________________________________________________________ 16
User Button and Light ______________________________________________________ 17
Down Arrow, Up Arrow, and Enter Key ______________________________________ 18
Ribbon Light ______________________________________________________________ 18
Card Light ________________________________________________________________ 18

Retrieve the Printer IP Address _________________________________________________ 19
Print a Test Card_______________________________________________________________ 20
Load and Replace Supplies____________________________________________________ 21

Load Cards _______________________________________________________________ 21

Single Hopper _________________________________________________________ 21
Optional Multi-Hopper _________________________________________________ 22

Load the Print Ribbon______________________________________________________ 22
Load the Cleaning Sleeve _________________________________________________ 23
Install the Ribbon Cartridge ________________________________________________ 24

Chapter 4: Printing Cards__________________________________________________________ 25

Before Starting to Print _________________________________________________________ 25
Print Cards ____________________________________________________________________ 26

Print from ID Software ______________________________________________________ 26
Print from Other Software __________________________________________________ 26

Summary of Contents for CD800



















































































































Reviews:

No comments

Related manuals for CD800

EasyThreed Mars Quick Start Manual preview
Mars
Brand: EasyThreed Pages: 15
Wasp WPL305 Quick Start Manual preview
WPL305
Brand: Wasp Pages: 2
Xante Ilumina Repacking And Shipping Manual preview
Ilumina
Brand: Xante Pages: 6
Xerox DocuPrint C525 A Quick Reference Manual preview
DocuPrint C525 A
Brand: Xerox Pages: 49
Xerox DocuPrint C2100 Quick Reference Manual preview
DocuPrint C2100
Brand: Xerox Pages: 206
Xerox DocuPrint 96 Installation Planning Manual preview
DocuPrint 96
Brand: Xerox Pages: 116
Xerox DocuPrint 96 Message Manual preview
DocuPrint 96
Brand: Xerox Pages: 358
Xerox DocuPrint 4635 Operator'S Manual preview
DocuPrint 4635
Brand: Xerox Pages: 344
Xerox DocuPrint 205 Operation Manual preview
DocuPrint 205
Brand: Xerox Pages: 59
Xerox DocuPrint 900 Product Safety Data Sheet preview
DocuPrint 900
Brand: Xerox Pages: 2
Xerox C230 Quick Reference Manual preview
C230
Brand: Xerox Pages: 10
Xerox DocuPrint 180 Maintenance Manual preview
DocuPrint 180
Brand: Xerox Pages: 51
Xerox DocuPrint 180 Solution Manual preview
DocuPrint 180
Brand: Xerox Pages: 110
Xerox 7300DX - Phaser Color Laser Printer Overview preview
7300DX - Phaser Color Laser Printer
Brand: Xerox Pages: 8
Xerox Phaser EX7750 Configuration Manual preview
Phaser EX7750
Brand: Xerox Pages: 220
Xerox Phaser EX7750 Quick Start Manual preview
Phaser EX7750
Brand: Xerox Pages: 28
Xerox 8400B - Phaser Color Solid Ink Printer Reference Manual preview
8400B - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 203
Xerox 3150 - Phaser B/W Laser Printer Product Data Sheet preview
3150 - Phaser B/W Laser Printer
Brand: Xerox Pages: 2

Brands by name

Popular brands

Load more brands