DataCard CD800, User Manual

Page: 36 / 114

22 Using the System
Optional Multi-Hopper
1.
Unlock the printer and open the multi ‐ hopper.
2.
Load the cards into the hoppers.
The input hoppers are labeled H1
through H6. You can load up to 100
cards into each hopper. (Cards can
stick together. Slide or fan the
cards to separate the edges before
placing them in the input hoppers.)
•
Insert ISO magnetic stripe cards
with the stripe (back side)
facing down and toward the
right side.
•
Insert smart cards with the smart card chip facing up and toward the back
of the hopper.
3.
Close the multi ‐ hopper and lock the printer when you finish loading cards.
Load the Print Ribbon
Load the print ribbon when you install the printer and when the ribbon runs out.
1.
Unlock the printer, if necessary, and open the printer supplies access door on
the optional multi ‐ hopper.
2.
Open the printer cover.
3.
Remove the print ribbon cartridge.