DataCard CD800, User Manual

Page: 35 / 114

CD800 Card Printer User’s Guide 21
Load and Replace Supplies
To prepare the printer to print cards, load blank card stock into the input hopper,
and load print ribbon and a cleaning sleeve onto the print cartridge.
Load Cards
Do the following to load cards in the printer.
Single Hopper
1.
Unlock the printer, if necessary,
and open the input hopper.
2.
Load the cards into the input
hopper. (Cards can stick together.
Slide or fan the cards to separate
the edges before placing them in
the input hopper.)
•
Insert ISO magnetic stripe
cards with the stripe (back
side) facing down and toward the right.
•
Insert smart cards with the smart card chip facing up and toward the back
of the hopper.
3.
Close the input hopper and lock the printer, if necessary.
If your system includes the optional laminator, also load overlay material
into the L1 and L2 (if equipped) laminators. Refer to "Load Laminator
Overlay Material" on page A ‐ 9 , for information about loading the
laminator cartridges.