Daihen Welbee WB-A350P, Owner'S Manual

Page: 89 / 150

6-29
Chapter 6 W
elding Condition
S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
1.
Depress the F (Function) key for one second or more.
2.
Turn the parameter adjustment knob, to display the function No. to set.
3.
Press the F (Function) key again.
⇒
The display on the right digital meter changes to a flashing mode.
4.
Turn the parameter adjustment knob, and change the setting value.
5.
Depress the F (Function) key for one second or more.
⇒
The setting of internal function completes, and the display returns to a normal state.
⇒
The function No. is displayed on the left digital
meter in a flashing mode.
⇒
The setting value of each function No. is displayed
on the right digital meter.
⇒
The set value is activated as it is changed.
⇒
Pressing the F (Function) key enables to return the
display to the status described in step 1.
A
sec.
Hz
JOB No.
V/
mm
%
Φ
DC NO-LOAD VOLTAGE WARNING
A
sec.
Hz
JOB No.
V/
mm
%
Φ
DC NO-LOAD VOLTAGE WARNING
A
sec.
Hz
JOB No.
V/
mm
%
Φ
DC NO-LOAD VOLTAGE WARNING