Daihen Welbee WB-A350P, Owner'S Manual

Page: 86 / 150

W
ELDING
S
ETTING
G
UIDE
W
ELDING
C
ONDITION
C
HAPTER
6
6-26
4.
Repeat the operations in Steps 2 and 3 to set the set values of setting item Nos. (S1-S4).
5.
Tap the WELDING SETTING GUIDE key.
⇒
Appropriate each parameter value the welding machine has determined based on the set values is
displayed on the digital meter and the LED of the WELDING SETTING GUIDE key turn on in red.
⇒
Check the contents of the welding conditions by pressing the PARAMETER SELECT key.
T I P S
• Each welding condition can be adjusted as needed with the parameter adjustment knob.
6.9.2 Details of Welding Setting Guide
This section explains details of the welding control items.
6.9.2.1 S1: Electrode diameter
The electrode diameter can be set by setting the left digital meter to "S1". Select one of 063 (
Ʒ
1.6), 094
(
Ʒ
2.4), 126 (
Ʒ
3.2), 157 (
Ʒ
4.0), 189 (
Ʒ
4.8), 220 (
Ʒ
5.6) and 252 (
Ʒ
6.4).
6.9.2.2 S2: Base metal material
The base metal material can be set by setting the left digital meter to "S2". Material is set by number as
shown on the table below.
6.9.2.3 S3: Weld joint
The welded joint shape can be set by setting the left digital meter to "S3". The joint shape is set by number
as shown on the table below.
• This setting is fixed to "3. Lap welded" when Arc Spot is selected.
Material No. Base metal material
1 Mild steel
2 Stainless steel
3 Aluminum
Joint No. Welded joints
1 T fillet welded
2 Butt welding
3 Lap welded
4 Corner welded