Daihen Welbee WB-A350P, Owner'S Manual

Page: 21 / 150

2-5
Chapter 2
P
ro
d
u
c
t S
p
e
c
ific
a
tio
n
a
n
d
C
o
n
fig
u
ra
tio
n
P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
2.2.3 Accessory (not supplied)
This section explains the accessories to be prepared by the customer before operating the welding power
source.
Prepare the following:
• Gas regulator
For the gas regulator, make sure to use a device for compressed gas cylinder that conforms to the specific
application of the shield gas.
• Shield gas
Use a shield gas suitable to the welding method.
• Cooling water circulation device
In using the water-cooled welding torch, prepare a cooling water circulation device.
• Filler wire
Generally, welding rods of 0.040" to 0.197" (1.0 mm to 5.0 mm) in wire diameter and 3.3 ft (1 m) in length
are packed as a 11 lbs (5 kg) package and sold in 22 lbs (10 kg) units on the material basis.
• Welding electrode holder
For STICK welding, prepare a welding electrode holder, welding holder cable, and a welding electrode.
2.2.4 Optional accessories
This section explains the optional accessories used with the welding power source.
2.2.4.1 Remote controls
Following items are optionally available including remote controls.
Product name Part No. (Model) Remarks
Analog remote control K5023L00 Includes 118.1" (3 m) cable
Digital remote control E-2452
CAN communication cable and BKCAN conversion connector are
separately required.
CAN communication cable
BKCAN-0405 196.9" (5 m)
BKCAN-0410 393.7" (10 m)
BKCAN conversion connector K5810B00
Foot-operated current controller K1104F00
Foot switch 4259-004 Includes 196.9" (5 m) cable
Torch switch (Push-button type) K509B00 Includes 13.1 ft (4 m) cable
Torch switch (Push-button type) K509C00 Includes 26.2 ft (8 m) cable
CAN communication module K5422C00 Used when the filler control device is used.
PC welding monitor K7231
Digital interface E-2503 (*1)
Data storage E-2560
Voltage reducing device K-300
Separately, a mounting bracket (K970J77) and a cable (base metal
side) (BKPDT-60R1) are required.
*1: Update of software version is required. For details, contact your dealer.