Local Configurations
193
Parameter
Description
Name
Enter the customized rule name.
Action
Configure the actions that are defined as intrusion. You can select
the
Appear
check box and the
Cross
check box.
Direction
In the
Direction
list, select the direction of crossing the configured
area. You can select
Enter&Exit
,
Enters
, and
Exits
.
Filtering Target
Click
to draw areas to filter the target.
You can configure two filtering targets (maximum size and
minimum size). When the target that is crossing the tripwire is
smaller than the minimum size or larger than the maximum size, no
alarms will be activated. The maximum size should be larger than
the minimum size.
Preset
In the
Preset
list, select the preset that you want to configure the
rule for.
Table 5-49
Drag to draw an area.
4)
Click
OK
to save the settings.
5)
Click
to set the actions to be triggered. For details, see "5.11.3.1.1 Configuring
Step 3
Select the
Enable
check box, and then click
Apply
.
Step 4
The intrusion detecting function is active. When the target enters and leaves the area,
or the target appears in the defined area, the system activates alarms.
5.11.3.1.3 Configuring Abandoned Rules
When the object is placed in the defined detection area for more than the set time, the system
activates alarms.
You can define the shape and quantity of detecting areas.
Period value can be configured.
Supports size filtering for target.
On the rule line that you added, in the
Type
list, select
Abandoned
Step 1
Summary of Contents for XVR Cooper Series
