Dahua Technology XVR Cooper Series User Manual Download Page 24

Page: 24 / 357

Getting Started

2.2.5 DH-XVR7416L-4KL-X/DH-XVR5432L-X

1. Remove the screws on

cover.

2. Use the screws to fix the

HDD onto the bracket.

3. Connect one end of HDD

cable to the HDD.

4. Connect the other end of

HDD cable to the

mainboard.

5. Use the power cable to

connect HDD and

mainboard.

6. Put back the cover and fix

the screws.

2.2.6 DH-XVR7816S-4KL-X/DH-XVR5832S-X/DH-XVR7816S-4KL-

X-LP

1. Remove the screws on

the cover.

2. Fix the HDD(s) onto the

bracket. Remove the top

bracket if you want to

install HDD to the bottom

bracket.

3. Connect one end of HDD

cable to the HDD.

4. Connect the other end of

HDD cable to the

5. Use the power cable to

connect HDD and

6. Put back the cover and fix

the screws.

Summary of Contents for XVR Cooper Series






































































































































































































































































































































































Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands

Dahua Technology XVR Cooper Series, User Manual

Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands