Dahua Technology XVR Cooper Series User Manual Download Page 23

Page: 23 / 357

Getting Started

screws of the HDD with the

holes on the back of the

device, and then fix the

screws.

HDD and mainboard.

2.2.4 DH-XVR4216AN-X/DH-XVR4232AN-X/DH-XVR5216AN-X/D

H-XVR5232AN-X/DH-XVR5208AN-4KL-X/DH-XVR5216AN-4KL-X/

DH-XVR5216A-X/DH-XVR7208A-4KL-X/DH-XVR7216A-4KL-X/DH-

XVR7208A-4K-X/DH-XVR5108H-4KL-X-8P/DH-XVR5208AN-4KL-X

-8P/DH-XVR5216AN-4KL-X-16P

1. Remove the screws on

the cover.

2. Fix the screws onto the

HDD, but do not be

fastened.

3. Put the HDD into the

Device.

4. Turn the device to see the

back side of it. Align the

screws of the HDD with

the holes on the back of

the device, and then fix

the screws.

5. Use the HDD cable and

power cable to connect

HDD and mainboard.

6. Put back the cover and fix

the screws.

Summary of Contents for XVR Cooper Series






































































































































































































































































































































































Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands

Dahua Technology XVR Cooper Series, User Manual

Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands