Local Configurations
120
Select the check box of the device.
Step 2
Click
Add
.
Step 3
The device is added into the
Added Device
area.
You can also double-click the device to add it into the
Added Device
area.
You can add devices in batches.
5.6.1.3 Adding Remote Devices Manually
On the
Registration
interface, click
Manual Add
.
Step 1
The
Manual Add
interface is displayed. See Figure 5-86.
Figure 5-86
Configure the settings for the manual adding device parameters. See Table 5-30.
Step 2
Parameter
Description
Channel
In the
Channel
list, select the channel that you want use on the
Device to connect the remote device.
Manufacturer
In the
Manufacturer
list, select the manufacturer of the remote
device.
IP Address
In the
IP Address
box, enter the IP address of remote device.
The default is 192.168.0.0 which the system cannot connect to.
RTSP Port
The default value setting is 554. You can enter the value according to
your actual situation.
HTTP Port
The default value setting is 80. You can enter the value according to
Summary of Contents for XVR Cooper Series
