Dahua Technology XVR Cooper Series, User Manual

Page: 46 / 357

The Grand Tour 30
No. Port Name Function
1 Audio output port
Outputs the analog audio signal to the devices such as the sound
box.
2 Video output port Connect to video output devices such as TV.
3
Audio input port
(MIC IN)
Tow-way talk input port which receives the analog audio signal
output from the devices such as microphone, pickup.
4
Audio output port
(MIC OUT)
Tow-way talk output port which outputs the analog audio signal to
the devices such as the sound box.
5 Audio input port
Receives the analog audio signal output from the devices such
as microphone.
6
Alarm input port
1
–16
Four groups of alarm output ports (Group 1: port 1 to port 4; 
Group 2: port 5 to port 8; Group 3: port 9 to port 12; Group 4:
port 13 to port 16). These ports receive the signal from the
external alarm source. There are two types; NO (Normally
Open) and NC (Normally Closed).
When your alarm input device is using external power, 
please make sure the device and the NVR have the same
ground.
Alarm output port
1
–5 (NO1–NO5;
C1
–C5; NC5)
Five groups of alarm output ports. (Group 1: port NO1
–

C1,Group 2:port NO2
–C2,Group 3:port NO3–C3, Group 4
：
port NO4
–C4, Group 5: port NO5, C5, NC5). These ports
output alarm signal to the alarm device. Please make sure
power supply to the external alarm device.
NO: Normally open alarm output port. 
C: Alarm output public end.

NC: Normally closed alarm output port.

RS-485
communication
port
You can connect to the control devices such as speed dome
PTZ. RS-485_A port is connected by the cable A and RS-485_B
is connected to the cable B.
Four-wire
full-duplex
RS-485 port (T+,
T-, R+, R-)
Four-wire full-duplex 485 port. T+ and T- is the output wire; R+
and R- is the input wire.
Control power
output (CTRL
12V)
Controls the 6
th
channel power output for alarm.
Turns off power output when there is alarm output.

Turns on power output when the alarm is cleared. 
12V power output
port
Provides power to external devices such as camera and alarm
device. Please note the supplying power shall be below 1A.
G Ground.
7
RS-232 debug
COM.
It is for general COM debug to configure IP address or transfer
transparent COM data.
8 VGA video output
Outputs analog video signal. It can connect to the monitor to view
analog video.