Dahua Technology XVR Cooper Series User Manual Download Page 22

Page: 22 / 357

Getting Started

7. Use the HDD cable and

power cable to connect

HDD and mainboard.

8. Install the bracket back and

then fasten the screws.

9. Put back the cover and

fasten the screws.

2.2.3 DH-XVR4116HS-X/DH-XVR5108HS-X/DH-XVR5116HS-X/DH

-XVR5104HS-4KL-X/DH-XVR5108HS-4KL-X/

DH-XVR5108H-X/DH-XVR5116H-X/DH-XVR5104H-4KL-X/DH-XVR

5108H-4KL-X/DH-XVR5116H-4KL-X/DH-XVR5108HE-X/DH-XVR51

16HE-X/DH-XVR7104HE-4KL-X/DH-XVR7108HE-4KL-X/DH-XVR7

116HE-4KL-X/DH-XVR7108HE-4K-X/DH-XVR5104HS-X/

DH-XVR4104HS-X/DH-XVR5104H-X/DH-XVR5104HE-X/DH-XVR4

108HS-X/DH-XVR5104HS-X1/DH-XVR4104HS-X1/

DH-XVR4108HS-X1/DH-XVR5104H-X1/DH-XVR5104HE-X1

1. Remove the screws on the

rear panel.

2. Fix the screws on the HDD,

but do not be fastened.

3. Place the HDD onto the

Device.

4. Turn the device to see the

back side of it. Align the

5. Use the HDD cable and

power cable to connect

6. Put back the cover and

fix the screws.

Summary of Contents for XVR Cooper Series






































































































































































































































































































































































Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands

Dahua Technology XVR Cooper Series, User Manual

Search results

Summary of Contents for XVR Cooper Series

Reviews:

Related manuals for XVR Cooper Series

Brands by name

Popular brands