Local Configurations
158
Parameter
Description
Flash Frequency
When setting the alarm mode of white light to be
Flash
, you can
select the flash frequency from
Low
,
Middle
, and
High
.
Table 5-37
Click
Apply
to complete the settings.
Step 3
5.10.3.3 Configuring Siren
When the motion detection alarm is activated, the system links the camera to generate sound
alarm.
To use this function, connect at least one camera that supports audio function.
Select
Main Menu > ALARM > ALARM OUTPUT > Siren
.
Step 1
The
Siren
interface is displayed. See Figure 5-126.
Figure 5-126
Configure the settings for the siren parameters. See Table 5-38.
Step 2
Parameter
Description
Channel
In the
Channel
list, select a channel that is connected to a camera that
supports audio function.
Play
Click
Play
to manually trigger the IP camera to play audio file.
Latch
Set a length of time for the Device to delay turning off alarm after the
alarm is cancelled. The value ranges from 5 seconds to 30 seconds,
and the default value is 5 seconds.
Audio Clip
Select the audio clip for the siren sound. The default setting is
Clip 1
.
Summary of Contents for XVR Cooper Series
