Local Configurations
156
Click
Apply
to complete the settings.
Step 6
5.10.3 Alarm Output Settings
5.10.3.1 Configuring Alarm Output
When the Device activates alarms, the connected alarm device generates alarms in the way
that you can configure in this section. You can connect to the output port of the Device or
connect wirelessly.
Auto
: When an alarm event is triggered on the Device, the connected alarm device
generates alarms.
Manual
: The alarm device is forced to keep generating alarms.
Stop
: The alarm output function is not enabled.
Select
Main Menu > ALARM > ALARM OUTPUT > ALARM Out
.
Step 1
The
ALARM OUTPUT
interface is displayed. See Figure 5-124.
Figure 5-124
Configure the settings for the alarm output. For details, see Table 5-36.
Step 2
Parameter
Description
General Alarm
Alarm Type
Select alarm type for each alarm output port.
Status
Indicates the status of each alarm output port.
Ext. Alarm
Alarm Box
Select the alarm box number corresponding to the address
number configured by the DIP switch on the Alarm Box.
Alarm Type
Select the alarm type for each alarm output ports.
Status
Indicates the status of each alarm output port.
Summary of Contents for XVR Cooper Series
