Daewoo Lanos 2002, Owner'S Manual

Page: 97 / 174

5–34 AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER)
Cassette On / Program Button (15)
To turn the cassette on while operating the
radio or CD player, press this button if a tape
is already inserted in the cassette slot. The
mode is transferred to the cassette and the
tape is played back.
If a tape is not in the cassette slot, the mode
is not changed to the cassette when you press
this button.
To play back the opposite side of tape while
playing back one side, press the cassette on /
program button.
Auto Reverse
When the tape reaches at the end of one side,
it will automatically reverse and play back the
other side of tape.
Fast Forward / Rewind Button (16)
Fast Forward :
To fast forward wind the tape, press the fast
forward button (
).
The "FF" indicator appears on the V.F.D.
When the tape reaches its end, it is automati-
cally reversed and played back from the be-
ginning of the opposite side. To stop the fast
forward movement, press the cassette on/pro-
gram button (15).
Rewind :
To rewind the tape, press the rewind button
(
). The "RE" indicator appears on the
V.F.D.
When the tape is fully rewound, it is played
back from the beginning of the same side.
To stop the rewind movement, press the cas-
sette on/program button (15).
AMS (Auto Music Search) Button (16)
AMS function searches the desired music by
counting the blank intervals between musics.
If there is a blank interval within one music
or there is no interval between musics, the
system may not search correctly.
To correctly search, an interval of at least 4
seconds between each music section is required.
To listen to the next music, press " " but-
ton. "A-FF" indicator appears on the V.F.D.
The tape moves forward and it is played back
from the beginning of next music.
When pressing "
" button, "A-RE" indica-
tor appears on the V.F.D. and the tape re-
winds. Then it is played back from the begin-
ning of current music.
To listen to the previous music, press "
"
button again when the tape stops at the be-
ginning of current music.
The AMS function is automatically cancelled
after finishing its function.
To cancel in the middle of AMS operation,
press the same AMS button again.