Daewoo Lanos 2002 Owner'S Manual Download Page 36

Page: 36 / 174

1–32 BEFORE DRIVING YOUR CAR

WARNING

If it is necessary to check beneath the
engine hood with engine running ;
• For manual transmission place

gearshift in neutral.

• For automatic transmission place

gearshift in P(park).

• Set parking brake fully.
• Do not wear any clothing such as

ties and handkerchiefs.

• Do not wear loose clothing.
• Keep hands and hair away from

moving parts.

WARNING

An open engine hood while vehicle
is in motion obscures forward vision,
resulting in an accident.
• Check that engine hood is fully

latched in position by pulling at
it's front edge before driving.

• Do not operate engine hood re-

lease handle while vehicle is in
motion.

• Do not move vehicle with engine

hood in raised position.

WARNING

The vehicle can still move from sta-
tionary while the engine hood is
open.
Before releasing the engine hood
latch ;
• Remove ignition key.
• For manual transmission place

gearshift in 1st or reverse.

• For automatic transmission place

gearshift in P(Park).

• Set parking brake fully.

Summary of Contents for Lanos 2002















































































































































































Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands

Daewoo Lanos 2002, Owner'S Manual

Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands