Daewoo Lanos 2002, Owner'S Manual

Page: 101 / 174

5–38 AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER)
Security number entering
1. Turning the ignition key to "ACC" or "ON"
and pressing power/volume control knob
to turn the audio system "ON" after con-
necting the audio system to battery, the
"AF" or "COdE" signal blinks on the V.F.D.
If "AF" signal blinks on the V.F.D., go to
step 2 or "COdE" signal blinks, go to step
4.
2. Enter AF (Area Frequency) code into the
unit with the preset buttons No. 1-4.
For example; if your AF code is "2"
press the preset button No. 2.
3. And then "COdE" signal blinks on the
V.F.D.
4. Enter your own "security number" into
the unit, with the preset button No.1-8.
For example; if your "security number"
is "1234".
1) Press the preset button No. 1.
"COdE" signal will be disappeared
and the "1---" signal will show on
the display.
2) Press the No.2, then the "12--" sig-
nal will appear,
3) Press the No.3, then the "123-" sig-
nal will appear,
4) Press the No.4, then the "1234" sig-
nal will appear and blink three times.
5. Then, the mode of unit will be switched
to radio.
If you fail to enter the "security number" into
the unit, the "Err" signal appear for a few
seconds and it will be disappeared.
Then the "COdE" signal will be displayed
again. Repeat the security number entering
procedure 4.
NOTE
• If you fail to enter the "AF code"
into the unit, an incorrect fre-
quency level is chosen and radio
reception is interfered.
• Please reset audio system by re-
moving the fuse "Audio (Batt.)"
and inserting it. (see fuse box in
the interior).
• Repeat the security number enter-
ing procedure.