Daewoo Lanos 2002, Owner'S Manual

Page: 84 / 174

AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–21
Fader Control:
Fader control is used to adjust the volume
separation between the front and rear
speakers.
1. Select the fader control mode using the
sound mode selector button.
2. When "FAD" indicator appears on the
VFD, rotate volume control knob clock-
wise to decrease the volume of rear
speakers. The fader level signal will
change from "F1" up to "F15".
3. To decrease the volume of the front
speakers, rotate volume control knob
counterclockwise.
The fader level signal will change from
"R1" up to "R15".
4. When the fader level signal "0" appears
on the VFD., front and rear speakers are
at equal volume.
5. After adjusting, the display will return to
full audio system information in 5 sec-
onds.
RADIO OPERATION
1. Press the power button or AM/FM but-
ton to turn the audio system on.
2. Press the "RADIO" button to select the
desired band.
Band changes as follows;
3. Tune in the desired station using up/
down tuning buttons (for manual or seek
tuning), preset buttons or preset scan
button.
4. To turn the radio on while the cassette
is operating, eject the tape or press the
AM/FM button (RADIO button).
How to Tune in the Desired Station
Seek Tuning:
To quickly search for the next receivable
lower station, press the tuning down button
(
).
For the next higher station, press the tuning
up button (
).
You must press the button for more than 0.5
seconds.
Manual Tuning:
Press the tuning up (
) or down ( )
button for less than 0.5 second to increase
or decrease the frequency.
Using Preset Buttons:
To select the desired preset station stored
on the preset buttons, press the correspond-
ing preset button for less than 2 seconds.
NOTE
Audio system can be operated when
the ignition key is at "ACC" or "ON"
position.
→
FM1
→
FM2
→
AM (or MW)
→
LW*