Daewoo Lanos 2002 Owner'S Manual Download Page 92

Page: 92 / 174

AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–29

GENERAL OPERATION

Power / Volume Control Knob (1)

Power On :
Press this knob to turn the audio system on.
The stations, tape or CD changer signal will
appear on the V.F.D.

Power Off :
Press the knob again to turn the audio system
off.
All signals will disappear on the V.F.D.

How to Adjust the Sound (2)

Sound Mode Selection (17) :

To select the desired audio mode, press

sound mode selector button (2).

The audio mode indicator and numeric sig-

nal will appear on the V.F.D.

Each time you press this knob, the audio

mode changes as follows ;

→

VOL

→

BAS

→

TRE

→

FAD

→

BAL

When the desired mode is selected, adjust

the sound by rotating power/volume control

knob (1).

After adjusting, the signal will be changed

to the original condition 5 seconds later.

Volume Control (1) :

1. Rotate power/volume control knob (1)

clockwise to increase the volume and

counterclockwise to decrease the vol-

ume. The volume level will appear as nu-

meric-signal on the V.F.D.

2. After adjusting, the signal will return to

the original condition 5 seconds later.

NOTE

• Audio system will be operated at

the mode which you operated be-
fore turning off the audio system.

• When ejecting the tape, the mode

is automatically transferred to the
last mode.

• Audio system can be operated

when the ignition key is at "ACC"
or "ON" position.

NOTE

• Audio system will be ON, inserting

a tape or CD, or pressing AM/FM
button, CD button, tape button.

Summary of Contents for Lanos 2002















































































































































































Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands

Daewoo Lanos 2002, Owner'S Manual

Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands