Daewoo Lanos 2002 Owner'S Manual Download Page 69

Page: 69 / 174

5–6 AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER)

CASSETTE OPERATION

1. Rotate the power/volume control knob

clockwise. Then the radio is turned on.

2. To turn the cassette on, insert the cas-

sette tape into the tape slot.

Mode is automatically transferred from

radio to cassette system, and the tape

begins to play.

"TAPE" and tape direction indicators will

appear on the L.C.D.

3. If a tape is aleardy loaded in the tape

slot when the audio system is turned on,
the cassette mode is turned on and the
tape begins to play.

4. To eject the tape, press the tape eject

button (11). Then the radio is automati-

cally turned on.

5. To turn off the audio system, rotate the

power/volume control knob counter-

clockwise until the click sound is heard.

Program :

To play back the opposite side of tape while

playing back one side, press the fast for-

ward (

) and rewind (

) buttons simul-

taneously.

Auto Reverse

When the tape reaches at the end of one

side, it will automatically reverse and play

back the other side of tape.

Fast Forward / Rewind & Program

Buttons (9)

Fast Forward :

To fast forward wind the tape, press the fast

forward button (

). The tape direction in-

dicator will blink on the L.C.D.

When the tape reaches its end, it is auto-

matically reversed and played back from the

beginning of the opposite side.

To stop the fast forward movement, press

the rewind button (

Rewind :

To rewind the tape, press the rewind but-

ton (

). The tape direction indicator will

blink on the L.C.D.

When the tape is fully rewound, it is played

back from the beginning of the same side.

To stop the rewind movement, press the fast

forward button (

Summary of Contents for Lanos 2002















































































































































































Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands

Daewoo Lanos 2002, Owner'S Manual

Search results

Summary of Contents for Lanos 2002

Reviews:

Related manuals for Lanos 2002

Brands by name

Popular brands