DAELIM A-FOUR -, Service Manual

Page: 95 / 186

●
Apply clean engine oil to a new bearing, and assemble
it to the crank case.
●
Install a new final gear oil seal.
CRANKSHAFT INSTALLATION
●
Apply clean engine oil to the new R. crankshaft
bearing, and press in the bearing into the R. crank case.
TOOLS : DRIVER HANDLE A
OUTER DRIVER 52x55mm
DRIVER PILOT 20mm
●
Use special tools to assemble the crankshaft bearing to
the L. crank case.
TOOLS : DRIVER HANDLE A
OUTER DRIVER 52x55mm
DRIVER PILOT 20mm
●
Clean the crankcase using cleaning oil, and check for
rack and damage to each area.
·
After removing the liquid gasket from the joining
face of the crankcase, amend the scratched areas
using oil ston.
·
Apply 2-cycle oil to the radial ball bearings and the
connecting rod large end portion.
●
Install the crankshaft to the L. crankcase.
·
Install not to interfere with the case with being
careful of connecting rod location.
TOOL : CRANKSHAFT ASSEMBLER
9-7
TRANSMISSION/CRANKSHAFT/CRANKCASE
DRIVER
HANDLE A
OUTER DRIVER
52X55mm
DRIVER PILOT
20mm
CRANKSHAFT
ASSEMBLER
L. CRANK
CASE