![background image](http://html1.mh-extra.com/html/daelim/a-four/a-four_service-manual_3154895109.webp)
10-11
FRONT WHEEL/FRONT FORK/STEERING
RIM VALVE REPLACEMENT
●
Cut off the rim valve at its base.
●
Apply mild detergent solution to a replacement rim
valve and insert it from inside of the rim.
·
Be sure to use the recommended rim valve.
·
Do not damage the valve hole.
·
Replace the rim valve whenever installing a tubeless
tire.
RIM INSPECTION
●
For a tube type tire, check the rim band and rim lock to
be sure they are installed properly.
·
Any attempt to mount passenger car tires on a
motorcycle rim may cause the tire bead to separate
from the rim with enough explosive force to cause
serious injury or death.
·
Always change rims which have been bent or have
cracks, as they may cause air leakage.
·
Always change the rim if there are any flaws over
0.5mm in depth and 1.0mm in width on the surface
touching the bead.
●
Check the tire for overall condition and use a mild
detergent solution on the bead.
TUBELESS TIRE INSTALLATION
●
Use only water as a lubricant when removing or
mounting tires.
●
Soap or other tire lubricants may leave a slippery
residue that can cause the tire to shift on the rim.
·
A tire that shifts on the rim may lead to a sudden loss
of air pressure while riding and an accident could
occur.
·
Be sure to use motorcycle tire levers.
·
Do not use the detergent solution on low pressure
tires. Use water only.
Summary of Contents for A-FOUR -
