![background image](http://html1.mh-extra.com/html/daelim/a-four/a-four_service-manual_3154895154.webp)
14-4
IGNITION SYSTEM
IGNITION SYSTEM INSPECTION
(PEAK VOLTAGE MEASUREMENT)
·
When sparks are not emitted from spark plug, after
checking for disconnection in wires and looseness,
measure peak voltage for each wire.
●
Connect the peak voltage adaptor to the digital tester.
DAELIM PVA MULTI TESTER
IGNITION COIL PRIMARY VOLTAGE
·
Make sure each wire is correctly connected to ensure
correct measurement.
·
Inspect when there is cylinder compression pressure
and with the spark plug cap securely connected to the
spark plug.
●
Remove the luggage box. (
3-3 )
●
With the ignition coil wire connected, contact the peak
voltage adaptor to the initial wire adaptor terminal
(black/yellow) and ground (on vehicle body.). Turn the
main swtich ON, operate the starter motor, and
measure the ignition coil initial side peak voltage.
CONTACT POINTS : BLACK/YELLOW TERMINAL “
⊕
⊕
”-BODY EARTH “
⊖
⊖
”
PEAK VOLTAGE : OVER 120V
·
When measuring voltage, do not touch the metal part
of the handle rod as there is the danger of receiving
an electric shock.
EXCITE COIL
·
Assemble the spark pug to the cylinder head, inspect
in a state having compression pressure.
REMOVE
●
Luggage box. (
3-3 )
●
CDI unit. (
14-7 )
●
Coupler from the CDI unit contact the peak voltage
adaptor to the excite coil wire (black/red and green) of
the harness side coupler.
●
Operate the starter motor and measure the excite coil
peak voltage.
CONTACT POINTS : BLACK/RED TERMINAL “
⊕
⊕
”-BODY EARTH “
⊖
⊖
”
PEAK VOLTAGE : OVER 120V
·
When measuring voltage, do not touch the metal part
of the handle rod as there is the danger of recieving
an electric shock.
Summary of Contents for A-FOUR -
