![background image](http://html1.mh-extra.com/html/daelim/a-four/a-four_service-manual_3154895094.webp)
●
Measure the side gap between the connecting rod big
end and the crank weight.
SERVICE LIMIT : 0.6mm
●
Check the vertical shaft play of the connecting rod big
end from the X and Y direction.
SERVICE LIMIT : 0.05mm
CRANKCASE BEARING REMOVAL
●
Remove the transmission and crankshaft.
INSPECTION
●
Manually turn the bearing inner race to see if it rotates
smoothly.
●
Check the outer race to see if it is accurately pressed
into the case.
●
If the outer race is excessively loose, or is loosely
pressed into the case, remove in and replace with a new
one.
REPLACEMENT
L. Crankcase
●
Use special tools to remove the drive shaft bearing.
TOOLS : BEARING REMOVER SET
REMOVER SHAFT
REMOVER HEAD
●
Remove the final gear bearing and oil seal.
●
Remove the counter gear bearing.
9-6
TRANSMISSION/CRANKSHAFT/CRANKCASE
OIL SEAL
CRANK BEARING
Summary of Contents for A-FOUR -
