DAELIM A-FOUR -, Service Manual

Page: 61 / 186

5-9
FUEL SYSTEM
REAR WHEEL MUD GUARD
FLANGE
BOLT
FLANGE
BOLT
REED
VALVE
INLET PIPE
•
REED VALVE
REMOVAL/INSTALLATION
●
Remove
-
Luggage box.
(
⇨
3-3)
-
Air cleaner.
(
⇨
5-4)
-
Carburetor.
(
⇨
5-4)
-
Negative pressure tube connected to the inlet pipe.
-
Oil pump cable.
(
⇨
4-3)
-
Rear wheel mud guard.
(
⇨
3-8)
-
Inlet pipe securing 4 flange bolts connected to the L
crank case.
-
Oil pump anchor plate.
-
Inlet pipe.
-
Reed valve.
●
Install in the reverse order of removal.
•
Do not remove the reed valve and replace the
assembly if necessary.
•
Keep the foreign material from entering into the
engine by cleaning around the needle valve.
INSPECTION
●
Check the reed valve for fatigue or damage and replace
the reed valve assembly if necessary.
●
Check the reed valve seat for cracks, damage and
clearance from the reed and replace the reed valve
assembly if necessary.
•
Be sure to replace the reed valve as an assembly.
Disassembling or bending the reed stopper will cause
engine trouble.