10-17
FRONT WHEEL/FRONT FORK/STEERING
●
Remove the fork tube from the bottom case.
●
Remove the piston and rebound spring from the fork
tube.
FRONT FORK INSPECTION
●
Place the fork spring on a level place, and measure the
free length.
●
If the free length deviates from the service limit,
replace the spring with a new one.
●
Check components for damage or abnormal wear.
Replace defective parts with new ones.
SERVICE LIMIT : 243mm
●
Place the fork tube on a V-block, and measure
deflection with a dial gauge.
SERVICE LIMIT : Replace if the deflection is greater
than 0.2mm
●
Check the slider bush contact face.
●
If the slider bush is extensively damaged, replace the
bottom case.
FRONT FORK ASSEMBLY
●
Wash parts with clean oil prior to assembling.
●
Assemble the rebound spring and thd fork piston to the
fork tube.
●
Assemble the fork tube to the bottom case.
FREE LENGTH
FORK SPRING
Summary of Contents for A-FOUR -
