![background image](http://html1.mh-extra.com/html/daelim/a-four/a-four_service-manual_3154895073.webp)
MOVABLE DRIVE FACE INSPECTION
●
The weight rollers push on the movable drive pulley
face (by centrifugal force); worn or damaged weight
rollers will interfere with this force.
●
Check the rollers for wear or damage and replace as
necessary.
●
Measure the O.D. of each roller, replace if the service
limit is exceeded.
SERVICE LIMIT : 15.4mm
●
Check the drive face boss for wear or damage and
replace as necessary.
●
Measure the O.D of the drive face boss. Replace the
boss if the service limit is exceeded.
●
Measure the I.D. of the drive face. Replace it if the
service limit is exceeded.
●
Movable drive face boss outer diameter
SERVICE LIMIT : 19.97mm
●
Movable drive face inner diameter
SERVICE LIMIT : 20.6mm
MOVABLE DRIVE FACE ASSEMBLY/INSTALLATION
●
Install the weight roller on the movable drive face.
●
Install the ramp plate.
●
Pack the inside of the movable drive face with the
specified amount of grease.
●
Install the movable drive face boss.
·
Do not get the grease on the pulley face. Remove any
misplaced grease with a degreasing agent.
●
Install the movable face assembly on the crankshaft.
7-7
KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION
MOVABLE DRIVE FACE
Summary of Contents for A-FOUR -
