DAELIM A-FOUR -, Service Manual

Page: 93 / 186

CRANKSHAFT REMOVAL
●
Loosen the 6 R. crankcase flange bolts.
●
Secure a crankcase puller on the R. crankcase and
remove the R. crankcase from the L. crankcase.
TOOL : CRANKCASE PULLER(0751-00003)
●
Secure a crankcase puller on the L. crankcase and remove
the crankshaft from the L. crankcase.
·
Be careful not to distort the mating surface of the
crank case during disassembly.
·
Do not force to disassemble by pounding on the
crankshaft.
TOOL : CRANKCASE PULLER(0751-00003)
●
Remove the oil seal from the R. and L. crankcases.
●
Remove the dowel pin.
CRANKSHAFT BEARING REMOVAL
●
If the radial ball bearing is left on the crankshaft,
remove the bearings out of the crankshaft using a
bearing puller.
TOOL : UNIVERSAL BEARING PULLER(0755-00001)
CRANKSHAFT INSPECTION
●
Place the crankshaft on a stand or V-block, and check
the journal vibration.
SERVICE LIMIT : RIGHT SIDE 0.1mm
LEFT SIDE 0.1mm
9-5
TRANSMISSION/CRANKSHAFT/CRANKCASE