Contents
:
TSIMBV10 Ninebot
Mini Service
manual V01
Table of
contents:
1. Equipment
/Tools
2. Replacement
3. Assembling
Scope
This specification
applies to authorized
service centers across
the world.
Updated
Version:
V012015-10-19
Ninebot Mini Service Manual
1.Work Plan
1.1Conditions
1.1.1Should obtained a training certificate and be eligible
for service and maintenance.
1.1.2Environmental requirements: The staff should have the
tools and anti-static gloves before start the repair and
maintenance.
Interior protection:setup the working area as electrostatic protection for the
device to prevent electrostatic leakage, dissipation, and, humidifier, shielding and
grounding.
Summary of Contents for Ninebot Mini
