10-9
FRONT WHEEL/FRONT FORK/STEERING
●
Apply grease to the dust seal rim.
●
Install the dust seal, and align the tangs of the
speedometer gear retainer with the gear groove to
assemble the speedometer gear box.
TUBELESS TIRE
REMOVAL
●
Remove the wheel.
·
Single brake disk type : To prevent damage to the
disk, place the wheel on the level surface with the
disk facing up.
·
Double brake disk type : Remove one disk first, then
place the wheel on the level surface with the other
disk facing up.
●
Remove the valve cap and bleed air by pressing the
valve core.
●
Remove the valve core after bleeding air completely.
●
Remove the valve stem nut and push the valve stem
lightly.
●
If a bead stopper is installed, loosen the lock nut and
push the bead stopper down.
●
Collapse in the bead with a tire bead breaker.
●
If no tire bead breaker is available, step on the side wall
to collapse the bead.
·
Do not step on the rim.
●
Collapse the bead into the rim center and slide the tire
out of position.
·
Tire can be easily removed once the beads are
collapsed completely.
●
Apply a mild detergent solution to the rim and tire
mating surfaces.
SPEEDOMETER GEAR BOX
Summary of Contents for A-FOUR -
