![background image](http://html1.mh-extra.com/html/daelim/a-four/a-four_service-manual_3154895091.webp)
●
Inspect the final shaft for wear or damage.
●
Inspect the countershaft for wear or damage.
Bearing Inspection
●
Manually turn the bearing inner race installed inside
the transmission cover, and check if the race is turning
smoothly.
●
Verify the outer race is accurately installed in the case.
●
Replace the bearing, if necessary.
·
Install the bearing with the carved mark directing to
the outside.
●
Use special tools to push in the bearing into the case.
TOOLS : DRIVER HANDLE A
OUTER DRIVER 52X55
mm
DRIVER PILOT 20
mm
●
Check the L. crank case oil seal for wear or damage.
9-3
TRANSMISSION/CRANKSHAFT/CRANKCASE
FINAL GEAR
COUNTER GEAR
COUNTER SHAFT
6203
BEARING
6202 BEARING
OUTER DRIVER
DRIVER
PILOT 20mm
DRIVER
HANDLE A
Summary of Contents for A-FOUR -
