background image

 

BMX SCOOTER INSTRUCTIONS 

Keycode: 42922315 

 

Read the information supplied by the manufacturer. 

WARNING! 

Assembly by an adult. Wear personal protective equipment. Do 

not use scooter at night. Do not use on wet surfaces, uneven or unpaved road. 
Do not use on public roads. This scooter is not designed for stunting.  

Not suitable for children under 7 years old. User

’s maximum weight: 100kg. 

 

Remove the scooter and all the parts from the box. Set out all the parts and read the 
assembly instructions prior to use. Keep the packaging until assembly is complete. 
Remove all protective packing material. 

 

General instructions 

● This scooter requires adult assembly. Prior to use, make sure that the scooter has 
been assembled properly. Due to the skill it requires, the scooter must be used with care 
in order to avoid falls or collisions likely to injure the user or others.  

● For use with suitable protective equipment, including a helmet, closed shoes, elbow, 

wrist and knee protection.  

● Ride outdoors in places that allow you to improve your skills, and NEVER in traffic, on 

roads or near motor vehicles, where serious accidents can happen. Watch your 
surroundings for pedestrians, bike, skateboard, scooter and other riders. Use in areas 
free from hazards such as poles, hydrants and parked cars. 

● Never use near streets, swimming pools, hills or steps. Use on smooth, dry, paved 

surfaces; avoid excessive speeds associated with downhill rides. Don

’t ride on loose 

debris (such as rocks, gravel or sand), or speed humps. Do not ride in the dark. 

● This scooter is not a toy for children under the age of 7 years. 

● Advise to the user to check the limitation of use according to regulations of road safety. 

  

Riding Instructions 

a) The scooter can be dangerous and can lead to a traffic accident when used on public 

highways. Not to be used on public roads. 

b) It is best used on a flat, clean surface, free of gravel and grease.  

c) Avoid bumps and drainage grates that may cause an accident. 

d) The scooter does not include any headlights or lights. It is therefore not suitable for 

use at night or during periods when visibility is limited.  

e) Do not allow more than one child to ride the scooter at the same time. 

f)  Do not ride the scooter until you have checked for proper brake adjustments. 

Summary of Contents for 42922315






Reviews: