D-Link DWS-1008 User Manual
18
Disabling or Reenabling Radios
You can disable or reenable radios on a radio profile basis or individual basis. You also can reset a radio
to its factory default settings.
Enabling or Disabling Individual Radios
To disable or reenable an access point radio, use the following command:
set {ap
port-list
| dap
dap-num
} radio {1 | 2} mode {enable | disable}
To disable radio 2 on port 3 and 6, type the following command:
DWS-1008#
set ap 3,6 radio 2 mode disable
success: change accepted.
Disabling or Reenabling All Radios Using a Profile
To disable or reenable all radios that are using a radio profile, use the following command:
set radio-profile name [mode {enable | disable}]
The following command enables all radios that use radio profile
rp1
:
DWS-1008#
set radio-profile rp1 mode enable
success: change accepted.
The following commands disable all radios that use radio profile
rp1
, change the beacon interval, then
reenable the radios:
DWS-1008#
set radio-profile rp1 mode disable
success: change accepted.
DWS-1008#
set radio-profile rp1 beacon-interval 200
success: change accepted.
DWS-1008#
set radio-profile rp1 mode enable
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......