D-Link DWS-1008 User Manual
11
Creating a New Profile
To create a radio profile, use the following command:
set radio-profile
name
[mode {enable | disable}]
Specify a name of up to 16 alphanumeric characters. Do not include the mode enable or mode disable
option.
After you create the radio profile, you can use the enable and disable options to enable or disable all
radios that use the profile.
To configure a new radio profile named
rp1
, type the following command:
DWS-1008#
set radio-profile rp1
success: change accepted.
To assign the profile to one or more radios, use the set ap radio radio-profile command.
Changing Radio Parameters
To change individual parameters controlled by a radio profile, use the commands described in the
following sections.
Note: You must disable all radios that are using a radio profile before you can change parameters in
the profile.
Changing the Beacon Interval
The beacon interval is the rate at which a radio advertises its beaconed SSID(s). To change the beacon
interval, use the following command:
set radio-profile
name
beacon-interval
interval
The interval can be a value from 25 ms through 8191 ms. The default is 100.
The beacon interval does not change even when advertisement is enabled for multiple SSIDs. MSS still
sends one beacon for each SSID during each beacon interval.
To change the beacon interval for radio profile
rp1
to 200 ms, type the following command:
DWS-1008#
set radio-profile rp1 beacon-interval 200
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......
