D-Link DWS-1008 User Manual
To display all entries that begin with 00, type the following command:
DWS-1008#
show fdb 00:*
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN
TAG Dest MAC/Route Des
[CoS] Destination Ports [Protocol Type]
-----------------------------------------------------------------------------------------------------------------------------
1
00:01:97:13:0b:1f
1
[ALL]
1
00:0b:0e:02:76:f5
1
[ALL]
Total
Matching FDB Entries Displayed = 2
Adding an Entry to the Forwarding Database
To add an entry to the forwarding database, use the following command:
set fdb {perm | static}
mac-addr
port
port-list
vlan
vlan-id
[tag
tag-value
]
To add a permanent entry for MAC address 00:bb:cc:dd:ee:ff on ports 3 and 5 in VLAN blue, type the
following command:
DWS-1008#
set fdb perm 00:bb:cc:dd:ee:ff port 3,5 vlan blue
success: change accepted.
To add a static entry for MAC address 00:2b:3c:4d:5e:6f on port 1 in the default VLAN, type the following
command:
DWS-1008#
set fdb static 00:2b:3c:4d:5e:6f port 1 vlan default
success: change accepted.
Removing Entries from the Forwarding Database
To remove an entry from the forwarding database, use the following command:
clear fdb {perm | static | dynamic | port
port-list
} [vlan
vlan-id
] [tag
tag-value
]
To clear all dynamic forwarding database entries that match all VLANs, type the following command:
DWS-1008#
clear fdb dynamic
success: change accepted.
To clear all dynamic forwarding database entries that match ports 3 and 5, type the following
command:
DWS-1008#
clear fdb port 3,5
success: change accepted.
Summary of Contents for DWS-1008
Page 1: ......
