D-Link DWS-1008, Product Manual

Page: 412 / 502

D-Link DWS-1008 User Manual
Command Description
show rfdetect vendor-list
Displays the list of OUIs that are allowed on the network. An
OUI identifies a piece of networking equipment’s vendor.
show rfdetect ssid-list Displays the list of SSIDs that are allowed on the network.
show rfdetect black-list
Displays the list of wireless clients that are not allowed on
the network.
show rfdetect attack-list
Displays the list of wireless devices that you want MPs to
attack with countermeasures.
show rfdetect ignore
Displays the BSSIDs of third-party devices that MSS ignores
during RF detection scans.
Displaying Rogue Clients
To display the wireless clients detected by a switch, use the following command:
show rfdetect clients [mac
mac-addr
]
The following command shows information about all wireless clients detected by a DWS-1008 switch’s
APs:
DWS-1008# show rfdetect clients
Total number of entries: 30
Client MAC Client AP MAC AP Port/Radio NoL Type Last
Vendor Vendor /Channel seen
----------------------------------------------------------------------------------------------------------------------------------
00:03:7f:bf:16:70 Unknown Unknown dap 1/1/6 1 intfr 207
00:04:23:77:e6:e5 Intel Unknown dap 1/1/2 1 intfr 155
00:05:5d:79:ce:0f D-Link Unknown dap 1/1/149 1 intfr 87
00:05:5d:7e:96:a7 D-Link Unknown dap 1/1/149 1 intfr 117
00:05:5d:7e:96:ce D-Link Unknown dap 1/1/157 1 intfr 162
00:05:5d:84:d1:c5 D-Link Unknown dap 1/1/1 1 intfr 52
The following command displays more details about a specific client:
DWS-1008#
show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: D-Link
Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: D-Link, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most recent 802.11
packet detected from the client.