D-Link DWS-1008 User Manual
1
Configuring Call Admission Control
To configure CAC for an SSID, enable the feature on the SSID’s service profile. When enabled, CAC
limits the number of active sessions a radio can have to 14 by default. You can change the maximum
number of sessions to a value from 0 to 100.
Enabling CAC
To enable or disable CAC on a service profile, use the following command:
set service-profile
name
cac-mode {none | session}
For example, to enable session-based CAC on service profile sp1, use the following command:
DWS-1008#
set service-profile sp1 cac-mode session
success: change accepted.
Changing the Maximum Number of Active Sessions
When CAC is enabled, the maximum number of active sessions a radio can have is 14 by default. To
change the maximum number of sessions, use the following command:
set service-profile
name
cac-session
max-sessions
The
max-sessions
can be a value from 0 to 100.
For example, to change the maximum number of sessions for radios used by service profile
sp1
to 10,
use the following command:
DWS-1008#
set service-profile sp1 cac-session 10
success: change accepted.
Configuring Static CoS
To configure static CoS for an SSID, enable the feature and set the CoS value. AP radios that forward
traffic for the SSID mark all the traffic with the static CoS value and use the corresponding forwarding
queue to forward the traffic. The static CoS value applies to all traffic on the SSID.
To enable static CoS and set the CoS value, use the following commands:
set service-profile
name
static-cos {enable | disable}
set service-profile
name
cos
level
The
level
can be a value from 0 (lowest priority) to 7 (highest priority). The default is 0
Summary of Contents for DWS-1008
Page 1: ......