D-Link DWS-1008 User Manual
01
Copying and Modifying the Web Login Page
To copy and modify the D-Link Web login page:
1. Configure an unencrypted SSID on a switch. The SSID is temporary and does not need
to be one you intend to use in your network. To configure the SSID, use the following
commands:
set service-profile
name
ssid-name
ssid-name
set service-profile
name
ssid-type clear
set service-profile
name
auth-fallthru web-portal
set radio-profile
name
service-profile
name
set {ap
port-list
| dap
dap-num
} radio {1 | 2} radio-profile
name
mode enable
Use the first two commands to configure a temporary SSID and temporary radio profile. Use the last
command to map the temporary radio profile with the disabled radio, and enable the radio.
Note: If the radio you plan to use is already in service, first you will need to disable the radio profile the
radio is in and remove the radio from the profile.
2. From your PC, attempt to directly access the temporary SSID. The switch should serve the
login page.
3. Use your browser to save a copy of the page.
4. Use a Web page editor or text editor to modify the page title, greeting, logo, and warning
text.
5. Save the modified page.
Note: Filenames and paths for image source files must be relative to the HTML page.
For example, if login page mycorp-login.html and image file mylogo.gif are located in
subdirectory mycorp/, specify the image source as mylogo.gif, not mycorp/mylogo.gif.
Summary of Contents for DWS-1008
Page 1: ......