D-Link DWS-1008 User Manual
CLI quickstart Command
The quickstart command runs a script that interactively helps you configure the following items:
• System name
• Country code (regulatory domain)
• System IP address
• Default route
• 802.1Q tagging for ports in the default VLAN
• Administrative users and passwords
• Enable password
• System time, date, and timezone
• Unencrypted (clear) SSID names
• Usernames and passwords for guest access using WebAAA
• Encrypted (crypto) SSID names and dynamic WEP encryption for encrypted SSIDs’ wireless
traffic
• Usernames and passwords for secure access using 802.1X authentication using PEAP-
MSCHAP-V2 and secure wireless data encryption using dynamic Wired Equivalent Privacy
(WEP)
• Directly connected DWL-8220AP access points
• Distributed DWL-8220AP access points
The
quickstart command displays a prompt for each of these items, and lists the default if applicable.
You can advance to the next item, and accept the default if applicable, by pressing
Enter.
The command also automatically generates a key pair for SSH.
The command automatically places all ports that are not used for directly connected access points into
the default VLAN (VLAN 1).
Caution: The quickstart command is for configuration of a new switch only. After prompting
you for verification, the command erases the switch’s configuration before continuing. If you run
this command on a switch that already has a configuration, the configuration will be erased.
In addition, error messages such as Critical AP Notice for directly connected APs can appear.
To run the
quickstart command:
1. Attach a PC to the switch’s serial console port. (Use these modem settings: 9600 bps, 8 bits, 1
stop, no parity, hardware flow control disabled.)
2. Press
Enter three times, to display a username prompt (Username:), a password prompt
(Password:), and then a command prompt such as the following:
DWS-1008-aabbcc>
3. Access the enabled level (the configuration level) of the CLI:
DWS-1008-aabbcc>
enable
Summary of Contents for DWS-1008
Page 1: ......