D-Link DWS-1008 User Manual
0
Adding or Removing a Static Multicast Router Port
To add or remove a static multicast router port, use the following command:
set igmp mrouter port
port-list
enable | disable
Adding or Removing a Static Multicast Receiver Port
To add a static multicast receiver port, use the following command:
set igmp receiver port
port-list
enable | disable
Displaying Multicast Information
You can use the CLI to display the following IGMP snooping information:
• Multicast configuration information and statistics
• Multicast queriers
• Multicast routers
• Multicast receivers
Displaying Multicast Configuration Information and
Statistics
To display multicast configuration information and statistics, use the following command:
show igmp [vlan
vlan-id
]
The show igmp command displays the IGMP snooping state, the settings of all multicast parameters
you can configure, and multicast statistics.
Summary of Contents for DWS-1008
Page 1: ......
