D-Link DWS-1008 User Manual
Command Example
The following command sets the minimum level of SNMP security allowed to authentication and
encryption:
DWS-1008#
set snmp security encrypted
success: change accepted.
Configuring a Notification Profile
A
notification profile
is a named list of all the notification types that can be generated by a switch, and
for each notification type, the action to take (drop or send) when an event occurs.
A
default notification profile
(named
default
) is already configured in MSS. All notifications in the default
profile are dropped by default. You can configure up to 10 notification profiles.
To modify the default notification profile or create a new one, use the following command:
set snmp notify profile {default |
profile-name
} {drop | send} {
notification-type
| all}
To clear a notification profile, use the following command:
clear snmp notify profile
profile-name
The profile-name can be up to 32 alphanumeric characters long, with no spaces. To modify the default
notification profile, specify
default.
The notification-type can be one of the following:
APBootTraps - Generated when an access point boots.
ApNonOperStatusTraps - Generated to indicate an AP radio is nonoperational.
ApOperRadioStatusTraps - Generated when the status of an AP radio changes.
APTimeoutTraps - Generated when an access point fails to respond to the switch.
AuthenTraps - Generated when the switch’s SNMP engine receives a bad community
string.
AutoTuneRadioChannelChangeTraps - Generated when the RF Auto-Tuning feature
changes the channel on a radio.
AutoTuneRadioPowerChangeTraps - Generated when the RF Auto-Tuning feature
changes the power setting on a radio.
ClientAssociationFailureTraps - Generated when a client’s attempt to associate with a
radio fails.
Summary of Contents for DWS-1008
Page 1: ......