D-Link DWS-1008 User Manual
1
Attribute
Description
Valid Value(s)
vlan-name
(network access mode only)
Virtual LAN (VLAN) assignment.
Note: On some RADIUS servers,
you might need to use the standard
RADIUS attribute
Tunnel-Pvt-Group-
ID, instead of VLAN-Name.
Name of a VLAN that you want the user
to use. The VLAN must be configured
on a switch within the Mobility Domain
to which this switch belongs.
acct-interim-interval
Interval in seconds between
accounting updates, if start-stop
accounting mode is enabled.
Number between 180 and 3,600
seconds, or 0 to disable periodic
accounting updates. The switch ignores
the
acct-interim-interval value and
issues a log message if the value is
below 60 seconds.
Note: If both a RADIUS server and
the switch supply a value for the acct-
interim-interval attribute, then the value
from the switch takes precedence.
Assigning Attributes to Users and Groups
You can assign authorization attributes to individual users or groups of users. Use any of the following
commands to assign an attribute to a user or group in the local database and specify its value:
set user
username
attr
attribute-name
value
set usergroup
group-name
attr
attribute-name
value
set mac-user
mac-addr
attr
attribute-name
value
set mac-usergroup
group-name
attr
attribute-name
value
If attributes are configured for a user and also for the group the user is in, the attributes assigned to
the individual user take precedence for that user. For example, if the start-date attribute configured
for a user is sooner than the start-date configured for the user group the user is in, the user’s network
access can begin as soon as the user start-date. The user does not need to wait for the user group’s
start date.
To change the value of an authorization attribute, reenter the command with the new value.
To assign an authorization attribute to a user’s configuration on a RADIUS server, see the documentation
for your RADIUS server.
Summary of Contents for DWS-1008
Page 1: ......