D-Link DWS-1008 User Manual
Managing Telnet Server Sessions
Use the following commands to manage Telnet server sessions:
show sessions admin
clear sessions admin telnet
[session-id]
These commands display and clear management sessions from a remote client to the switch’s Telnet
server.
Note: If you type the clear sessions admin telnet command from within a Telnet session, the session
ends as soon as you press Enter.
DWS-1008#
show sessions admin
tty
Username Time
Type
------------------------------------------------------------------
tty0
3644
Console
tty2
tech
6
Telnet
tty3
sshadmin
381
SSH
3 admin sessions
To clear all Telnet server sessions, type the following command:
DWS-1008#
clear sessions telnet
This will terminate manager sessions, do you wish to continue? (y|n) [n]y
Cleared telnet session on tty2
Managing HTTPS
Enabling HTTPS
HTTPS is disabled by default. To enable HTTPS, use the following command:
set ip https server {enable | disable}
Caution: If you disable the HTTPS server, Web View access to the switch is also disabled.
Summary of Contents for DWS-1008
Page 1: ......
