D-Link DWS-1008 User Manual
Installation
Caution: The DWS-1008 switch has been designed and tested to be installed in an operating ambient
temperature of 0° C to +40° C (32° F to 104° F). To reduce the risk of equipment damage, install
equipment with consideration to these ambient conditions.
Serial Console Cable
The serial console port has a female DB-9 connector and supports the EIA-232D signaling standard.
You need a standard DB-9-male-to-DB-9-female PC modem cable.
Serial Console Pin Signals
10/100 Ethernet Cable Wiring
Connections on the 10/100 ports require CAT5 cable based on the EIA/TIA-586 standard. The 10/100
Ethernet ports on the DWS-1008 switch provide automatic MDI/MDX, which automatically crosses over
the send and receive signals if required.
The table below lists the pin signals for 10/100 Ethernet straight-through wiring. Pins 4, 5, 7, and 8 are
used only when Power over Ethernet (PoE) is enabled on the port. RD means Receive Data and TD
means Transmit Data.
Note: Mounting a DWL-8220AP access point on a solid surface requires CAT5 cable that does not have
strain relief. For installation on all other surfaces, you can use CAT5 cable with or without strain relief.
Switch Pin
Usage
PC Pin
Usage
2
Receive
3
Transmit
3
Transmit
2
Receive
5
Ground
5
Ground
DWS Switch
Other Device
Pin
Function
Pin
Function
1
RD+
1
TD+
2
RD-
2
TD-
3
TD+
3
RD+
4
PoE+
4
PoE+
5
PoE+
5
PoE+
6
TD-
6
RD-
7
PoE-
7
PoE-
8
PoE-
8
PoE-
Summary of Contents for DWS-1008
Page 1: ......